S-UHF-R4 / R7 Install Guide

 

Operating Mode 
• When the reader is switched on, it initialises itself for 12 seconds. 
• The green LED of visualisation is lighted. 
• Anti-collision up to 4 tags. 
• If there are several tags in front of the reader, it will send the codes one by one with a delay of 200 ms. 
• The cycle of a scan varies according the number of tags present in front of the antenna the fastest is 100 ms. 
• When the reader reads a tag the green led of visualisation is activated for 200 ms.

Recommendations 
• Use a filtered and regulated power supply.
• Adjust the position of the reader in order to be parallel to the tags. 
• Do not look at the led of visualisation without the cover on. 
• Do not over lighten the cover screws in order to not crush waterproof joining. 
• A power supply which provides 2.5 A to 3 A min. is required. 
• For a safe exposure, please take care that the distance between the user(s) and the antenna(s) has to be minimum 25 cm.